What Wood Putty Is Used On A Wood Strip Canoe at Alpha Blog

What Wood Putty Is Used On A Wood Strip Canoe. Both of these coamings are made of walnut and basswood. Putting a base coat of an oil based finish gives the grain a chance to shine. When the epoxy resin on the hull is sanded smooth i'll put the same polyurethane mix on the hull, wait a day and then shoot everything with the water borne finish. It will also depend on what glue you are using. Stapleless construction takes a lot longer, so you would likely be dealing with one strip at a time, but it's still one of the best glues to use.

Epoxy with microfibres and sawdust will be stronger than your wood glue. When the epoxy resin on the hull is sanded smooth i'll put the same polyurethane mix on the hull, wait a day and then shoot everything with the water borne finish. It is important to choose a putty that is compatible with the type of wood used in the canoe, as well as the type of finish. A friend of mine used latex based plastic wood putty for his 18 ft stripper to fill staple holes and any small gaps between planks. He decided to refinish the canoe using west system epoxy. Both of these coamings are made of walnut and basswood. It will also depend on what glue you are using.

Strips are completed Wood canoe, Wooden canoe, Cedar strip canoe

It is important to choose a putty that is compatible with the type of wood used in the canoe, as well as the type of finish. What Wood Putty Is Used On A Wood Strip Canoe Stapleless construction takes a lot longer, so you would likely be dealing with one strip at a time, but it's still one of the best glues to use. The liquid epoxy penetrates the wood slightly and provides a chemical bond between the putty and the wood. Epoxy with microfibres and sawdust will be stronger than your wood glue. It will also depend on what glue you are using. A friend of mine used latex based plastic wood putty for his 18 ft stripper to fill staple holes and any small gaps between planks.